AAC/CellSMART Service Data Module
- Features
- Specifications
- Ordering Information
- Support Information
- Datasheet
| System Clocking | |
| Clock fallback | User-selectable primary/secondary clock source with automatic fallback and recovery. |
| Clock sources | Internal reference oscillator, or recoved from user-specified physical port |
| Internal reference oscillator | Stratum 4 or better |
| System Management | |
| Enterprise MIBs | AAC enterprise MIB supports all AAC configurable items with the exception of User IDs, Passwords, and SNMP Community Strings |
| SNMP management | SNMPv1 |
| Standard MIBs | RFC 1155, RFC 1212, RFC 1213 (MIB II), RFC 2495 (DS1/E1), RFC 2496 (DS3/E3), RFC 1493 (Bridge), RFC 1643 (Ethernet) |
| User interface | Character-based form interface accessed through: COMM port, or TELNET over either Ethernet or an in-band AAL5 ATM connection. The COMM port connection adapts to the connected terminal. DTE modem port provided on ISC. |
| Management Access | |
| DTE COMM port | One, one chassis front panel Type: DCE Connector: 9-pin socket, RS232 EIA/TIA-574 Baud rate: Auto-detect Control signals: DTR & RTS required Flow control:None Terminal type:VT100 or equivalent |
| DTE modem port | One, on ISC Type:DTE Connector: 9-pin socket, , RS232 EIA/TIA-574 Baud rate: 9600 Parity: None Data bits 8 Stop bits: 1 Control signals: None, DTR & RTS required Terminal type: VT100 or equivalent |
| Ethernet port | Supports only remote management over an Ethernet LAN Type: 10Base-T Ethernet port Connector: RJ-45 Supported protocols: TCP/IP for SNMP access to MIBs, TELNET access to user interface and ICMP Echo |
| In-band over ATM connection | Supported protocols: TCP/IP for SNMP access to MIBs, TELNET access to user interface and ICMP Echo Supported encapsulations: Null, LLC/SNAP, NLPID, EtherType |
| Alarms | |
| ACO button | The Alarm Cut Off push button deactivates the audible alarm relay contacts |
| Alarms port | Alarm relay contacts for an external audible or visual alarm system Audible alarm types: Critical, Major, Minor Visual alarm types: Critical, Major, Minor Connector: 9-pin socket, RS232 EIA/TIA-574 Alarm contacts: Normally open Maximum voltage: 110V DC or 125V AC Maximum current: 1 A |
| Memory Card | |
| Memory Card | Compact Flash Type 2 memory card for configuration backup and software updates Minimum of 16 Mbytes Flash memory |